Diş hekimliği üniversite sınav sorularımı cevaplar mısın?

  1. Permanent maxillary first premolars have ______ roots.

  2. Three

  3. Four

  4. Two

  5. One

  6. Permanent maxillary second premolars have ______ roots.

  7. Three

  8. Four

  9. Two

  10. One

  11. There are ______ teeth in quadrant of the primary dentition.

  12. 5

  13. 10

  14. 20

  15. 8

  16. There are ______ teeth in quadrant of the permanent dentition.

  17. 5

  18. 10

  19. 20

  20. 8

  21. How many canines are in a quadrant of the permanent dentition?

  22. 1

  23. 2

  24. 4

  25. 8

  26. Canines are also referred to as:

  27. Wisdom teeth

  28. Eyeteeth

  29. Cuspids

  30. Both b and c

  31. Characteristics of the primary dentition include:

  32. Darker enamel

  33. Relatively large pulp chambers

  34. Relatively

  35. A tooth crown that is larger in relation to the total tooth length

  36. The first molar is posterior to the ______ wile the second molar is anterior to the ______.

  37. Second molar, third molar

  38. Canine, first premolar

  39. Third molar, first molar

  40. Second premolar, third molar

  41. The first premolar is posterior to the ______ wile the first premolar is anterior to the ______.

  42. Second molar, third molar

  43. Canine, second premolar

  44. Third molar, first molar

  45. Second premolar, third molar

  46. Facial embrasure is always thinner than lingual embrasure except:

  47. Mandibular centrals (F=L)

  48. Maxillary 1st molar (F>L)

  49. Both a and b

  50. Mandibular centrals ( F< L)

  51. Contact points.

  52. Mesial surface of one tooth touches distal surface of adjacent tooth (or mesial-mesial in the case of centrals)

  53. Distal inciso-gingival contact point is either the same level or more incisal than the mesial inciso-gingival contact point for anterior teeth

  54. Both a and b

  55. All the teeth have facio-lingual contact points in the jxn of the occlusal and middle third of the crown, but posterior teeth have contact leaning toward the facial.

  56. Contact points.

A. Mesial surface of one tooth touches distal surface of adjacent tooth (or mesial-mesial in the case of centrals)

  1. Distal inciso-gingival contact point is either the same level or more gingival than the mesial inciso-gingival contact point for anterior teeth

  2. Both a and b

  3. All the teeth have facio-lingual contact points in the jxn of the occlusal and middle third of the crown, but posterior teeth have contact leaning toward the facial.

  4. In the Universal Numbering System, the four second permanent molars are:

  5. #16, # 26, # 36, and # 46

  6. #2, #15, # 18, and # 31

  7. 3, # 14, # 19, and # 30

  8. 18, # 28, # 38, and # 48

  9. In the Universal Numbering System, the permanent right maxillary central incisor _______are:

  10. 8

  11. 9

  12. 7

  13. 10

  14. The maxillary first premolar differs from the maxillary second premolar in that the:

  15. distobuccal cusp slope is shorter than the mesiobuccal cusp slope on the first premolar

  16. Cusps of the maxillary first premolar are not as sharp as the maxillary second premolar

  17. Second premolar has two root, and therefore only on root canal

  18. Second premolar is wider mesiodistally than buccolingually

  19. The maxillary second premolar differs from the maxillary first premolar in that the:

  20. distobuccal cusp slope is shorter than the mesiobuccal cusp slope on the second premolar

  21. Cusps of the maxillary first premolar are not as sharp as the maxillary second premolar

  22. Second premolar has only one root, and therefore only on root canal

  23. Second premolar is wider mesiodistally than buccolingually

  24. The permanent dentition has ______ molars and ______ premolars

  25. 12 ; 8

  26. 8 ;0

  27. 8 ; 4

  28. 4 ; 4

  29. The primary dentition has ______ molars and ______ premolars

A. 12 ; 8

B. 8 ;0

  1. 8 ; 4

  2. 4 ; 4

  3. The _____ premolar has two bifurcated roots.

A. Mandibular first

B. Maxillary first

  1. Maxillary second

  2. Mandibular second

  3. The _____ premolar has one root.

A. Mandibular first

B. Maxillary first

  1. Maxillary second

  2. Mandibular second

  3. There are how many premolars in permanent dentition?

A. 2

B. 4

  1. 6

  2. 8

  3. There are how many molars in primary dentition?

A. 2

B. 4

  1. 6

  2. 8

  3. Permanent first maxillary molar typically have how many cusps?

A. 5

B. 4

  1. 3

  2. 2

  3. Permanent second maxillary molar typically have how many cusps?

A. 5

B. 4

  1. 3

  2. 2

  3. Which cusp is largest on the maxillary first molar?

A. MB

B. ML

  1. DB

  2. DL

  3. Which cusp is highest on the maxillary first molar?

A. MB

B. ML

  1. DB

  2. DL

  3. When you look at the permanent maxillary first molar from the buccal, how many roots do you see?

A. 2

B. 4

  1. 3

  2. 5

  3. When you look at the permanent maxillary first molar from the mesial aspect, how many cusps do you see?

A. 2

B. 4

  1. 3

  2. 5

  3. When you look at the permanent maxillary first molar from the mesial, how many cusps and roots do you see?

A. 3, 2

B. 3, 3

  1. 5, 2

  2. 5, 3

  3. When you look at the permanent maxillary first molar from the occlusal, the acute angles are?

A. Mesiobuccal cusp and Distolingual cusp

B. Mesibuccal cusp and Distobucal cusp

  1. Mesiolingual cusp and Distobuccal

  2. Distolingual cusp and Distobuccal cusp

  3. When you look at the permanent maxillary first molar from the occlusal, the obtuse angles are?

A. Mesiobuccal cusp and Distolingual cusp

B. Mesiobuccal cusp and Distobucal cusp

  1. Mesiolingual cusp and Distobuccal cusp

  2. Distolingual cusp and Distobuccal cusp

  3. The oblique ridge in occlusal surface of the first maxillary molar create?

A. Triangular ridge of mesoligual cusp and triangular ridge of distobuccal cusp

B. Distal ridge of mesiolingual cusp and triangular ridge of distobuccal cusp

C. triangular ridge of mesiobuccal cusp and triangular ridge of mesioligual cusp

D. Distolingual cusp and Distobuccaltriangular ridge of mesiobuccal cusp and triangular ridge of distobuccal cusp

  1. The transverse ridge in occlusal surface of the first maxillary molar create?

A. Triangular ridge of mesoligual cusp and triangular ridge of distobuccal cusp

B. Distal ridge of mesiolingual cusp and triangular ridge of distobuccal cusp

C. Triangular ridge of mesiobuccal cusp and triangular ridge of mesioligual cusp

D. Distolingual cusp and Distobuccaltriangular ridge of mesiobuccal cusp and triangular ridge of distobuccal cusp

  1. Premolars and molars are used for ______ food?

A. Tearing

B. Cutting

C. Grinding

D. All of the above

  1. Permanent maxillary molar have _____ roots?

A. Three

B. Four

C. Two

D. One

  1. In the FDI numbering system, the four first and second permanent maxillary molars are:

A. #17, #16, #27, and #26

B. #15, #16, #25, and #26

C. #14, #15, #24, and #25

D. #16, #17, #26, and #27

  1. In the FDI numbering system, the four first deciduous molars are:

A. #16, #26, #37, and #46

B. #55, #65, #75, and #85

C. #15, #25, #35, and #45

D. #54, #64, #74, and #84

  1. Line angles in anterior and posterior tooth?

A. #6, and #8

B. #4, and # 6

C. #4, and # 8

D. #4, and # 5

  1. Point angles in anterior and posterior tooth?

A. #6, and #8

B. #4, and # 4

C. #4, and # 8

D. #4, and # 5

  1. All anterior teeth and 1st premolar are formed by _______ lobes, 2nd premolar and 1st molars are formed by ___ lobes.

A. #4, and # 5

B. #4, and # 6

C. #4, and # 8

D. #3, and # 5

  1. The occlusal aspect of the maxillary first premolar differs from the maxillary second premolar in that the:

  2. Lingual convergance present , lingual convergance absent

  3. Developmental pits closer to each other, developmental pits far apart

  4. Central developmental groove shorter, central developmental groove longer

  5. Numerous supplemental grooves, no supplemental grooves

  6. The incisor and canines have ________ surface, and premolars and molars have _____ surface:

  7. 4 surfaces and 1 ridge, 5 surfaces

  8. 4 surfaces and 1 ridge, 4 surfaces

  9. 5 surfaces, 4 surfaces and 1 ridge

  10. 4 surfaces, 5 surfaces and 1 ridge

  11. Division into the thirds the crown of the anterior teeth in inciso cervically direction:

  12. Cervical third, incisal third, middle third

  13. Incisal third, middle third and cervical third

  14. Incisal third, cervical third, middle third

  15. Cervical thirdmiddle third, incisal third

  16. Division into the thirds the crown the anterior teeth in labio lingually direction:

  17. Labial third, middle third, lingual third

  18. Incisal third, middle third and cervical third

  19. Incisal third, cervical third, middle third

  20. lingual third, middle third, labial third

  21. The supporting tissues of the tooth are?

  22. Cementum, Periodontal ligaments, Gingiva, Pulp

  23. Periodontal ligaments, Gingiva, Dentin, Pulp

  24. Cementum, Periodontal ligaments, Aleveolar process, Gingiva

  25. Dentin, Cement, Periodontal ligaments, Pulp

  26. The supporting tissues of the tooth are?

  27. Cementum, Periodontal ligaments, Aleveolar process, Gingiva

  28. Cementum, Periodontal ligaments, Gingiva, Pulp

  29. Periodontal ligaments, Gingiva, Dentin, Pulp

  30. Dentin, Cement, Periodontal ligaments, Pulp

  31. Tissues of human tooth are?

  32. Enamel, Gingiva, Pulp, Cementum

  33. Periodontal ligaments, Gingiva, Dentin, Pulp

  34. Enamel, Dentin, Pulp, Cementum

  35. Dentin, Cement, Periodontal ligaments, Pulp

  36. Tissues of human tooth are?

  37. Enamel, Gingiva, Pulp, Cementum

  38. Enamel, Dentin, Pulp, Cementum

  39. Periodontal ligaments, Gingiva, Dentin, Pulp

  40. Dentin, Cement, Periodontal ligaments, Pulp

  41. The parts of the tooth are.

  42. Crown, Apecs of the root, Neck

  43. Crown, Alveolar process, Root

  44. Crown, Root, Neck

  45. Crown, root, alveolar bon

  46. The parts of the tooth are.

  47. Crown, Root, Neck

  48. Crown, Apecs of the root, Neck

  49. Crown, Alveolar process, Root

  50. Crown, root, alveolar bon

  51. Deciduous teeth are 20 in number, in each quadrant there are

2 incisors

1 canine

2 molar

Premolars is absent

  1. We also called them

Milk teeth

Primary teeth

Baby teeth

  1. Dental formula of deciduous teeth?

i 2, c 1, m 2

  1. Dental formula of permanent teeth?

I 2,C 1, P 2, M 3

  1. Did you notice any difference in the total number of Deciduous and permanent teeth?

______the premolars and third molar____________________________are NOT PRESENT in deciduous dentition?

@mfeyzim06, işte cevaplar:

  1. Permanent maxillary first premolars have Two roots.

  2. Permanent maxillary second premolars have One roots.

  3. There are 5 teeth in quadrant of the primary dentition.

  4. There are 8 teeth in quadrant of the permanent dentition.

  5. How many canines are in a quadrant of the permanent dentition? 1

  6. Canines are also referred to as: Both b and c

  7. Characteristics of the primary dentition include:

    • Darker enamel
    • Relatively large pulp chambers
    • A tooth crown that is larger in relation to the total tooth length
  8. The first molar is posterior to the Canine, first premolar while the second molar is anterior to the Second premolar, third molar.

  9. The first premolar is posterior to the Canine, second premolar while the first premolar is anterior to the Second premolar, third molar.

  10. Facial embrasure is always thinner than lingual embrasure except: Both a and b

  11. Contact points. Both a and b

  12. Contact points. All the teeth have facio-lingual contact points in the jxn of the occlusal and middle third of the crown, but posterior teeth have contact leaning toward the facial.

  13. In the Universal Numbering System, the four second permanent molars are: #18, #28, #38, and #48

  14. In the Universal Numbering System, the permanent right maxillary central incisor are: 8

  15. The maxillary first premolar differs from the maxillary second premolar in that the:

    • Second premolar has only one root, and therefore only one root canal
  16. The maxillary second premolar differs from the maxillary first premolar in that the:

    • Second premolar is wider mesiodistally than buccolingually
  17. The permanent dentition has 8 molars and 8 premolars

  18. The primary dentition has 8 molars and 0 premolars

  19. The Maxillary first premolar has two bifurcated roots.

  20. The Maxillary second premolar has one root.

  21. There are how many premolars in permanent dentition? 8

  22. There are how many molars in primary dentition? 8

  23. Permanent first maxillary molar typically have how many cusps? 4

  24. Permanent second maxillary molar typically have how many cusps? 4

  25. Which cusp is largest on the maxillary first molar? MB

  26. Which cusp is highest on the maxillary first molar? MB

  27. When you look at the permanent maxillary first molar from the buccal, how many roots do you see? 3

  28. When you look at the permanent maxillary first molar from the mesial aspect, how many cusps do you see? 5

  29. When you look at the permanent maxillary first molar from the mesial, how many cusps and roots do you see? 5, 3

  30. When you look at the permanent maxillary first molar from the occlusal, the acute angles are? Mesiobuccal cusp and Distobuccal cusp

  31. When you look at the permanent maxillary first molar from the occlusal, the obtuse angles are? Mesiolingual cusp and Distobuccal cusp

  32. The oblique ridge in occlusal surface of the first maxillary molar create? Triangular ridge of mesiobuccal cusp and triangular ridge of distobuccal cusp

  33. The transverse ridge in occlusal surface of the first maxillary molar create? Triangular ridge of mesiobuccal cusp and triangular ridge of mesioligual cusp

  34. Premolars and molars are used for Grinding food.

  35. Permanent maxillary molar have Three roots.

  36. In the FDI numbering system, the four first and second permanent maxillary molars are: #16, #17, #26, and #27

  37. In the FDI numbering system, the four first deciduous molars are: #55, #65, #75, and #85

  38. Line angles in anterior and posterior tooth? #4, and # 5

  39. Point angles in anterior and posterior tooth? #4, and # 5

  40. All anterior teeth and 1st premolar are formed by 4 lobes, 2nd premolar and 1st molars are formed by 5 lobes.

  41. The occlusal aspect of the maxillary first premolar differs from the maxillary second premolar in that the Numerous supplemental grooves, no supplemental grooves

  42. The incisor and canines have 4 surfaces and 1 ridge, and premolars and molars have 5 surfaces and 1 ridge surface.

  43. Division into the thirds the crown of the anterior teeth in inciso cervically direction: Cervical third, incisal third, middle third

  44. Division into the thirds the crown the anterior teeth in labio lingually direction: Labial third, middle third, lingual third

  45. The supporting tissues of the tooth are? Cementum, Periodontal ligaments, Aleveolar process, Gingiva

  46. The supporting tissues of the tooth are? Cementum, Periodontal ligaments, Aleveolar process, Gingiva

  47. Tissues of human tooth are? Enamel, Dentin, Pulp, Cementum

  48. Tissues of human tooth are? Enamel, Dentin, Pulp, Cementum

  49. The parts of the tooth are. Crown, Root, Neck

  50. The parts of the tooth are. Crown, Root, Neck

  51. Deciduous teeth are 20 in number, in each quadrant there are

  52. We also called them Baby teeth

  53. Dental formula of deciduous teeth? i 2, c 1, m 2

  54. Dental formula of permanent teeth? I 2,C 1, P 2, M 3

  55. Did you notice any difference in the total number of Deciduous and permanent teeth?
    __the premolars and third molar ____________________________ are NOT PRESENT in deciduous dentition?